How To String A Lacrosse Head

How To String A Lacrosse Head

How To String A Lacrosse Head

 

Stringing a lacrosse head is a crucial skill for any lacrosse player, as it allows you to customize the pocket of your stick to suit your personal playing style and preferences. The process may seem daunting at first, but with a little patience and practice, you can learn to string a lacrosse head like a pro.

 

Here is a step-by-step guide on how to string a lacrosse head:

 

Gather your materials: You will need a lacrosse head, a ball stop, some wax, stringing material (such as waxed nylon, leather, or mesh), a needle, and some pliers.

 

1. Prep the head: Start by removing any old stringing material from the head, using the pliers to gently pull out the strings. Next, apply some wax to the inside of the head to lubricate the stringing process and make it easier to pull the strings through the holes.

 

2. String the sidewalls: Begin by stringing the sidewalls, which are the vertical strings that run along the sides of the head. Start at the top of the head and work your way down, pulling the string through the holes and tying it off at the bottom of the head.

 

3. String the topstring: The topstring is a horizontal string that runs across the top of the head, connecting the sidewalls. Begin by tying one end of the string to the sidewall at the top of the head, then pull the string across the top of the head and tie it off on the other sidewall.

 

4. String the shooters: The shooters are the strings that run from the topstring down to the throat of the head. Begin by tying one end of the string to the topstring, then pull the string down through the holes in the head and tie it off at the throat. Repeat this process on the other side of the head.

 

5. String the pocket: The pocket is the most important part of the stringing process, as it determines the depth and shape of the pocket. There are many different pocket styles to choose from, so you can experiment with different configurations to find what works best for you.

 

6. To create a traditional pocket, start by tying one end of the string to the bottom of the sidewall. Next, pull the string up through the holes in the head, creating a series of diamonds as you go. When you reach the top of the head, tie the string off on the topstring. Repeat this process on the other side of the head.

 

7. Install the ball stop: The ball stop is a small rubber piece that sits at the bottom of the pocket and helps keep the ball in place. To install it, simply tie one end of a string to the ball stop and pull it through the holes in the head, tying it off at the bottom of the sidewall.

 

8. Finish the stringing process: Once you have completed the pocket and installed the ball stop, give the strings a final adjustment to make sure the pocket is even and properly tensioned. You may need to add or remove strings to achieve the desired depth and shape of the pocket.

 

In conclusion, stringing a lacrosse head requires a bit of time and patience, but with practice, you can become a pro at it. By following these steps and experimenting with different pocket styles, you can create a customized stick that suits your personal playing style and preferences.

 

Leave a Comment

Your email address will not be published. Required fields are marked *